Electro-Harmonix EHX MEL9 Tape Replay Machine Pedal - Power Supply Included. Pays homage to nine of the coolest Mellotron® sounds: Orchestra, Cello, Strings, Flute, Clarinet, Saxophone, Brass, Low Choir and High Choir. Works on guitar without modifications, special pickups or MIDI implementation and tracks bends, slides, even whammy dive bombs! Also works with bass guitar down do the open A string as well as keyboards. Includes independent Effect and Dry volume controls so you can create the perfect mix at the Effects output.Dry Output jack outputs your input signal at unity gain. Attack control sets the volume swell speed. As its turned clockwise the notes fade in more gradually. Sustain control adjusts the release time after a sound is stopped. As its turned clockwise, the fade out time increase.
Comes with a standard EHX 9.6DC200mA PSU. Dimensions in inches: 4.0 (w) x 4.75 (l) x 2.25 (h). Dimensions in mm: 102 (w) x 121 (l) x 89 (h).Resch AB and Markus Resch. Now any electric guitar player can have access to nine magically quirky, dark and unique Mellotron® sounds. No more extra devices such as special and cumbersome 13-pin MIDI pickups! In addition to electric guitar, you can trigger the MEL9 with any instrument that produces an electrical output, such as a keyboard or a bass, down to 55 Hz or A1.
The polyphonic MEL9 has superior tracking; you can create single notes or chords with ease. The MEL9 will follow guitar bends, dive bombs, slurs, and any other guitar expression/performance techniques you can throw at it!
WARNING: Your MEL9 comes equipped with an Electro-Harmonix 9.6DC-200BI power supply (same as used by Boss® & Ibanez®: 9.6 Volts DC 200mA). The MEL9 requires 100mA at 9VDC with a center negative plug. GETTING STARTED Connect the supplied power adapter to the 9V power jack. Plug your instrument into the INPUT jack; connect your amp to the EFFECT OUTPUT jack.
Set the DRY knob to minimum (fully counterclockwise) and set the other top row knobs to 12 oclock. Select a preset (ORCHESTRA is a good starting point) and step on the footswitch to turn on the LED. Play your instrument and adjust controls to your liking. DRY VOL KNOB The DRY VOL knob controls the volume of the untreated instrument level on the EFFECT OUTPUT jack.EFFECT VOL KNOB The EFFECT VOL knob controls the overall volume of the selected preset at the EFFECT OUTPUT jack. ATTACK KNOB Use the ATTACK knob to set the volume swell speed, or the speed at which the effect begins to be heard. Turn the ATTACK knob down (fully counterclockwise) for a fast attack with minimum swell. Turn the knob up to increase the amount of swell and to have the notes fade in more gradually. NOTE: When using the BRASS preset, the ATTACK knob adjusts the speed of a filter sweep. This adjustment controls how quickly the BRASS sound gets bright. SUSTAIN KNOB The SUSTAIN knob controls the amount of time a sound continues to play after you stop playing. When the SUSTAIN knob is turned down (fully counter-clockwise), the fadeout time is at its minimum setting. Turn the knob up to increase the fadeout time. NOTE: When using the BRASS preset, the SUSTAIN knob adjusts the amount of lip buzz? Characteristic of brass instruments such as trumpet? Heard at the onset of new notes. Lip buzz is a subtle addition to the BRASS preset, and at times you may have difficulty hearing the impact on the sound produced by adjusting the SUSTAIN knob. PRESET KNOB Turn the white numbered knob to select a preset sound.
DRY OUTPUT JACK The DRY OUTPUT jack outputs the signal present at the INPUT jack through a buffer circuit. In either EFFECT or BYPASS mode, the dry signal is always present at the DRY OUTPUT jack. EFFECT OUTPUT JACK The EFFECT OUTPUT jack sends the mix set by the DRY and EFFECT volume controls. BYPASS FOOTSWITCH Press the BYPASS footswitch to toggle the MEL9 OUTPUT jack between buffered BYPASS and EFFECT mode. The status LED lights when you are in EFFECT mode.ORCHESTRA This sound represents a full orchestraincluding an octave below the normal guitarand produces a gigantic, full sound. CELLO This sound of a solo cello includes the cellos natural vibrato. STRINGS Presenting the sound of a small four-piece string section, including natural vibrato.
FLUTES This preset presents the classic solo flute sound heard on many recordings. CLARINET This sound of a solo clarinet sounds great both as a solo (played monophonically) instrument and when playing chords.
SAXOPHONE This funky vintage British solo saxophone sound is perfect for playing Beatles-like rock lines. It blends great with an overdriven guitar. BRASS This preset is a trumpet-like sound, and when playing chords it produces a great brass section sound. As noted earlier, the ATTACK and SUSTAIN knobs work differently for this preset than for other presets. The ATTACK knob controls a filter sweep for brass synthesizer sounds and the SUSTAIN knob adds the lip buzz characteristic of trumpet/brass sounds.LOW CHOIR This sound is a full low-voiced choir made up of many voices. HIGH CHOIR This sound is a higher-voiced choir made up of many voices. NOTES AND SPECIFICATIONS Buffered bypass Input impedance: 1M Ohm Output impedance (for both output jacks): 500 Ohm Current draw: 100mA. TIPS ON GETTING OPTIMUM PERFORMANCE FROM THE MEL9 1. The MEL9 is generally best used as the first pedal in an effects chain. Place modulation, delay, and reverb effects after the MEL9. The unit will not perform well if placed in the effects loop of a guitar amp. Avoid placing a distortion or overdrive in front of the MEL9. Placing distortion or overdrive in front of the MEL9 will muddy up the input signal and cause the tracking to be unstable.
If you want to add overdrive or distortion, place it after the MEL9. The MEL9 tracking response is limited depending on the preset chosen, and the type of electronic instrument you use to trigger the effect. On guitar, the usable range for these sounds goes up to about the 23rd fret on the high-E for some presets, and to only the 16th fret for others.On bass guitar, the MEL9 tracks only about as low as the open A-string. The MEL9 imitates Mellotron® sounds, so the MEL9 will only sound as real for any of the nine instruments as the Mellotron® does. For example, the FLUTE preset is the same as the Mellotrons flute which is a recording of a real flute. Pay attention to performance gestures (vibrato, trills, slides, and so on) and the settings for ATTACK and SUSTAIN. If you want to mimic a Mellotron®, play pianistically with as little guitar inflection as possible.
If you want to simulate an actual sound such as a cello, adapt your performance gestures to help mimic the actual sound. Otherwise, let your creativity guide your approach to playing the MEL9. And that means you should feel free to go wild by combining atypical performance techniques with traditional sounds. So what if an actual clarinet does not let you bend a note up a whole tone or more? Now you can go for it!Powered by SixBit's eCommerce Solution. The item "Electro-Harmonix MEL9 Tape Replay Machine Pedal with Power Supply MEL 9 EHX" is in sale since Tuesday, April 19, 2016. This item is in the category "Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Effects Pedals\Other Guitar Effects Pedals". The seller is "myguitarsupply" and is located in Augusta, Georgia. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Viet nam, Uruguay.